JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.
Default welcome msg!
If you are running Win ME, 2000, XP, Vista, you do not need to install the driver for the player. Your computer will detect the player and recognize it as a mass storage device. The player’s drive folder will appear in My Computer as a Removable Disk or MP3 Player. Any modification on this drive will take effect on the player. For instance, when you delete a file, it will be removed from the player. Hence, you can copy and paste or drag and drop files on here, and they will be transferred to the player.
From time to time, the manufacture will load some files on the device for testing purposes and they may forget to remove them. Some antivirus programs are a bit sensitive and may think the files are a threat. As a precaution, we recommend the user to format the player before using it. This will ensure the player is completely emptied out.
Please check the FM region and make sure it is set to Canada/USA. In addition, the player will use the earphone as an antenna to receive radio frequency. You must leave the earphone plugged in for the radio feature to work properly.
Please do not insert the small CD to the slot as you will not be able to eject it afterward. You can download the CD content from our FTP page. Please contact us to obtain the FTP link.
The mini receiver is now stored in the mouse under the battery cover.1. Turning your mouse over, open the battery compartment cover.2. Remove the mini USB receiver.3. Insert 2 x AAA size batteries (not included) to the correct + and - polarity markings, replace the battery compartment cover and turn on.4. Turning your keyboard over, open the battery compartment cover.5. Insert 2 x AAA size batteries (not included) to the correct + and - polarity markings and replace the battery compartment cover.6. Plug the mini USB receiver into an available USB port on your computer. The plug and play feature will automatically connect the mouse and keyboard for use.LINK TO ENGLISH PDF LINK TO FRENCH PDF
If the connection dropped or have not been successfully established; Please follow these steps to re-connect the mouse. 1. Press all three buttons on the mouse at the same time for 5 seconds. 2. Release them and immediately plug the receiver into your computer. 3. Your system will detect and connect the mouse again.
Pairing is the process that allows your phone to find and connect with your Bluetooth headset. In order to pair your devices, you will need to put your headset into pairing mode and enter a passkey into your mobile phone.Here are the steps:1. Press and hold the Power (or Talk) button on the headset until the Blue light stay solid (or flashing Red and Blue). 2. Switch over to your phone, enter the Bluetooth menu and select the option to scan for new devices. If you can’t find this option, please refer to the user manual for your phone. 3. Your phone will pick up all the devices in range and display them on the screen. 4. Select the “Hipstreet” device to connect. 5. If you receive a prompt for the Pass Code (or Pass Key), enter “0000” (four zeros) and finish the pairing process. You only have to perform this paring process one time.If you turn off the phone, or headset, you can re-pair them again simply by going to the Bluetooth menu and selecting the headset again from the list. It will reconnect without a pass code and you are up and running again.
Please follow these steps: 1. Insert the micro SD card into the scanner, then turn on the device. 2. Press the "format" button with a pin and an "F" will display on the screen. 3. Press the Power/Scan button to start formatting the card. 4. SD card indicator will blink until format is complete.
Please note: this is a feature of the projector.
Please open My Computer (or Computer) and verify if the "Removable Disk" is present (and accessible). You will see it if your computer recognized the device. If the "Removable Disk" is not available, you can try these suggestions: 1. Turn off your antivirus and then connect the device to your computer. 2. Run Windows Update on your PC to look for update or fix that may correct this issue. 3. Connect the device to another computer and see if the system will recognize it. 4. Reboot the computer with the device plugged in if necessary.
32GB and larger drives require a special update (exFAT) installed on your system to function properly. You can download and install this update from this link http://support.microsoft.com/kb/955704. Note: The update is provided by Microsoft. If you encounter any issue, please contact them for assistance. Note: You must have a valid version of Microsoft Windows XP in order for this update to work. The exFAT update is built into Windows Vista/7.
1. Go to Settings – Apps – tap on the ALL tab. 2. Scroll down to and tap on Contacts Storage. 3. Tap on Clear data, then Force stop, then Disable. 4. Restart your tablet and the error should not show up anymore.
1.Turn on the scanner and slide the Wi-Fi switch to ON. " 口口口口 " will appear on the LCD screen.Wait 30 seconds for the Wi-Fi to initialize.A "blue" LED will flash every 3 seconds once the Wi-Fi mode is ready for a connection.2. On your device open "Settings" and turn on Wi-Fi. 3. Search or scan for new wireless connection and select the "WIFISCAN-xxxxxx" network. 4. Enter the password "123456789" and tap connect.
1.Once you have your devce connected to the Wi-Fi scanner you can open the Swipe app on your Apple evice to access the files. OR 2. Enter the web address 10.10.1.1 on your device's browser to access your files.
You can try the following troubleshooting tip to help you connect your device to the Wi-Fi scanner. ->Power cycle your device and scanner. ->Turn Wi-Fi off and on again. -> Forget or delete the network from your device, then reconnect.-> Check and re-enter Wi-Fi password.
